Reverse Osmosis Unit

Description

People are becoming more and more aware of the importance of good clean healthy drinking water, and with this they are starting to understand that the combination of the purity of a reverse osmosis system and the amazing benefits of the alkaline, ionized water is as close to “perfect water” as we can get!

In the past this has been very difficult to do this for a variety of reasons. Our technical water experts here at AlkaViva have solved the problem of combining these two very different, yet outstanding water technologies. Now we are proud to offer both perfectly clean and perfectly healthy drinking water for you and your family!

Works perfectly with your water ionizer!

Your Reverse Osmosis System:

Osmosis is the process of water passing through a semi permeable membrane in order to balance the concentration of contaminants on each side of the membrane. A semi permeable membrane is a barrier that will pass some particles like clean drinking water, but not other particles like arsenic and lead.

Reverse osmosis uses a semi permeable membrane; however, by applying pressure across the membrane, it concentrates contaminants (like a strainer) on one side of the membrane, producing crystal clear water on the other. This is why RO systems produce both clean water and waste water that is flushed from the system. This reverse osmosis system also utilizes both carbon block filtration technology and pH balancing re-mineralization filtration technology, and can therefore provide a higher quality water than carbon filtration systems alone.

Your system is a five stage RO which is based upon separate treatment segments within the one complete water filtration system. These stages are as follows:

Note: Filter & Membrane life may vary based upon local water conditions and/or use patterns. Generally stages 1, 2, 4 and 5 should be replaced after 1,000 gallons whereas stage 3 should be replaced after 2,000 gallons.